Cleaner, Better, Faster
A leader in the field of wire protection and management.
Wire Abrasion Protection
Wire Abrasion Protection, Continuous mechanical attachment without adhesives,
Chemical Resistant, Salt Spray Resistant, Shock and Vibration Resistant, Highly
flexible around corners and in cutout, Flame Retardant UL94 V-0 for indoor or
outdoor use , Heat Continuous 185 F (85 C) and 285 F (140 C) to -40 C (-40 F),
RoHS Compliant, Panel thickness range from 0.020 (0.5mm) to 0.260 (6.6mm), Low
Profile, Military Specified
Edge Trim is a better, cleaner, and faster way to cover sharp sheet metal edges and protect your equipment from failure due to abrasion. Trim-Fast is available in a variety of materials, which include a flexible steel or stainless steel substrate covered with Silicone, EPDM, or PVC allowing for fast and easy assembly.
is an efficient solution allowing
for easy installation of wires or bundles of cable. It is a tough, lightweight
method used to contain and protect cable assemblies, hoses and wire
harnesses from abrasion and cutting.
is an efficient solution
allowing for easy installation of wires or bundles of cable. It is a tough,
lightweight method used to contain and protect cable assemblies,
hoses and wire harnesses from abrasion and cutting.
Cable Management
Fiber bend radius control and cable management, Flame Retardant UL94 V-0
material, Impact Resistant, 3 sizes and 3 mounting options for horizontal drops,
vertical drops and fiber spools, Fast and easy assembly, perfect for OEM designs
and data center installers, Clip, screw, or rivet mounting, Optional
hook-and-loop cable retainer, RoHS Compliant
The tamper-proof Push-Mount Cable Tie with a low profile head prevents snagging when the cable is trimmed and the harness is pulled through a bulkhead. The remaining terminal end falls below the low profile receptacle, eliminating sharp edges common in most wire ties. The Push-Mount Cable Tie snaps quickly into a 0.250" (6.35mm) diameter hole within a .135” (3.43mm) maximum thickness panel. The result is a multi-tasking wire management solution that makes the Push-Mount Cable Tie a better, cleaner, faster solution.
Device Technologies offers , high quality cable ties used to bundle and secure cables. Our cable ties are a combination of RoHS compliant and UL and Mil Spec approved products. Tested and approved to standards such as the National and Canadian Electrical Code, our high quality cable tie products are offered in a wide variety of colors, styles, sizes, and options.
The cable management strap is a self gripping fastener that offers a neat and secure way to bundle cables and cords. The Hook and Loop Strap wraps around cables and latches on its opposing side for secure containment. The Hook and Loops Strap is made from UL94 flammability rated material.
DTi’s Protect-Fast™ Expander provides excellent flexibility and abrasion resistance for wire and cable organizing within a variety of applications including telecommunications, automotive, and data center design. Its open woven structure enables the Expander to be enlarged up to 3 times the initial diameter.
Circuit Board Hardware
Circuit board spacer, 12 spacing heights offered, Push-pin rivet type with
latch-in/latch-out feature for modules, without tools, High Shock and Vibration
Resistance, Flame Retardant UL94 V-2, Fast and easy assembly for replacement of
circuit boards, RoHS Compliant
Enclosure/Door Seals
Edge Seal is a better, cleaner, and faster way to project your equipment from environmental conditions dust, low and high temperatures, and moisture. Seal-Fast Edge Seal is available in a variety of materials, which include a flexible steel or stainless steel substrate, Silicone, EPDM, or PVC gasket and seal assembly allowing for fast and easy assembly.
EMI/RFI Shielding Materials
The quickly attaches a lid or cover to a panel protecting printed circuit boards and electronic components. The fastener combines mounting clips, which quickly snap into holes to create an electrical ground contact from the lid to the panel.
The quick snaps into panels protecting printed circuit boards and electronic components. The fastener quickly snaps into panel edges to create an electrical ground contact between panels.
DTi’s Protect-Fast™ Shield Expander provides excellent flexibility and cable organizing within a variety of applications including telecommunications, automotive, and data center design. Its open woven structure enables the Shield Expander to be enlarged up to 3 times the initial diameter. It also provides excellent shielding effectiveness and grounding because of its woven fibers and conductive copper wire design.
EMI gaskets exhibit very low surface resistivity (<0.1Ω). Conductive adhesive tape can be supplied on all gaskets.These gaskets are more flexible than conventional products so they fit uneven surfaces smoothly and securely while providing a low compressive force. Available in high flame retardant configurations.
are constructed from a wide combination of conductive foam, conductive fabric and conductive pressure-sensitive adhesive tape. The foam is plated with Copper/Nickel or Silver and it is very flexible, providing good shielding effectiveness. Conductive pressure sensitive adhesive eases installation on a number of substrates.
Services
The Device Technologies (DTi) linear electrostatic technology powder coating system is a reel to reel process that applies thermoset and thermoplastic resins such as nylon, epoxy, and polyester to linear substrates such as wire, cable, and strip. The powder coating can be applied to the entire surface or selectively to create decorative and functional finishes for corrosion protection or electrical insulation.
| Sample Kit |
+ Enlarge |
Call our customer service
department at 1-800-669-9682 ext 13 and ask about our Spring-Fast®, Fast-Drop™ and Push-Lok™ sample kit, for evaluation on your products. |
Product quality and speed of assembly, combined with long-term durability and reliability,
are critical to remaining competitive. Device Technologies' products for wire management and
electronic packaging are elegantly direct solutions for problems across a wide range of customers.
DTi has been designing and manufacturing innovative solutions for industry and
electromechanical product manufacturers since 1984, with design expertise that
embodies more than 50 years of specialty fastener experience and perspective.
We begin with proven problem-solving techniques that help us think outside the box.
We stay focused on your overall operating efficiency and your business model-not simply
on the individual process problem in question.
The result is product after product that works systematically to cut effort, time, and
expense from your manufacturing.
The cleaner, better, faster wire protection grommet solution
Spring-FastŪ is the fastest, safest, most reliable way to protect wires and cables from
abrasion. It locks on with finger pressure or application roller in seconds, a significant time reduction,
eliminating solvents, adhesives, ancillary materials and volatile organic compounds
(VOC's) while enhancing productivity and quality.
Do your fiber optics need rounding up?
Sharp corners may be fun on the race track, but they can wreak havoc on your fiber
optic cables, causing lost data and reduced efficiency.
Fast-Drop™ Radius Control Modules provide the BICSI recommended minimum bend
radius for fiber optic cables, assuring consistent data transmission. The RCM is
molded of UL94 V-0 flame retardant impact resistant polycarbonate and is rigid
enough to withstand large bundle loads. NEBS compliant, the RCM will speed up
your wiring integration efforts and increase productivity.
The universal RCM snaps on to any sheet metal edge up to .104" (2.7mm), retained
by a zinc plated carbon steel clip. It also may be screw or tab mounted to the cabinet.
Cables are easily contained with the use of our hook and loop strap. Available from stock
in three widths-1" (2.5cm), 1.75" (4.4cm) and 3" (7.6cm), in black or beige. Slotted side
design accommodates stacking for multiple or various lengths.
|
