DTi Products

Wire Protection Grommet Edging

Wire Abrasion Protection, Continuous mechanical attachment without adhesives, Chemical Resistant, Salt Spray Resistant, Shock and Vibration Resistant, Highly flexible around corners and in cutouts Flame Retardant UL94 V-0 for indoor or outdoor use , Heat Continuous 185 F (85 C) and 285 F (140 C) to -40 C (-40 F), RoHS Compliant, Panel thickness range from 0.020 (0.5mm) to 0.260 (6.6mm), Low Profile, Military Specified.

Cable Management

Device Technologies offers Fast-Drop™ to prevent networking catastrophes resulting from micro-bends, DTi has developed the Fast-Drop cable management solution. The patented Fiber Bend Radius Control Modules are a family of simple-to-use products, which are supplied in three widths (1.00, 1.75 and 3.00) for routing of fiber wires copper cables, the perfect cable management system for fiber routing.

Circuit Board Hardware

Circuit board spacer, 12 spacing heights offered, Push-pin rivet type with latch-in/latch-out feature for modules, without tools, High Shock and Vibration Resistance, Flame Retardant UL94 V-2, Fast and easy assembly for replacement of circuit boards, RoHS Compliant

High Performance Enclosures and Doors Seals

The Seal-Fast™ Edge Seal is a better, cleaner, and faster way to project your equipment from environmental conditions dust, low and high temperatures, and moisture. Seal-Fast Edge Seal is available in a variety of materials, which include a flexible steel or stainless steel substrate, Silicone, EPDM, or PVC gasket and seal assembly allowing for fast and easy assembly.

Edge Trim

Trim-Fast Edge Trim is a better, cleaner, and faster way to cover sharp sheet metal edges and protect your equipment from failure due to abrasion. Trim-Fast is available in a variety of materials, which include a flexible steel or stainless steel substrate covered with Silicone, EPDM, or PVC allowing for fast and easy assembly.

EMI/RFI Shielding & Thermal Management

The Ground-Fast Grounding Clip quickly attaches a lid or cover to a panel protecting printed circuit boards and electronic components. The fastener combines mounting clips, which quickly snap into holes to create an electrical ground contact from the lid to the panel.