DTi Develops Cutting Edge Manufacturing Savings Model  

Paris, France June 17, 2019 – Device Technologies (DTi), a leading manufacturer of wire protection products, will showcase its Manufacturing Savings Model during the Paris Air Show at the Le Bourget Parc des Expositions from June 17-21, 2019. The Savings Model was created to demonstrate the lower installed costs and increased productivity by using DTi’s Spring-Fast® Grommet Edging over legacy glued grommets.  

The model allows manufacturers to enter 3 data points; Aircraft Produced per Year, Penetrations per Aircraft and WRAP/Labor Rate to quantify costs savings using DTi's FAA Approved and EWIS Compliant wire protection. 

Nick Petri, Managing Director of DTi indicated, This matrix can quickly illustrate why Spring-Fast is the best choice for wire protection needs, providing best in class performance with 49% install cost savings and a 9.5x productivity gains. 

DTi will be at the Paris Air Show demonstrating the model as well as sharing critical business case histories in aircraft fuselage, seating, avionics, in-flight entertainment and electrical systems manufacturing applications. Visit them along with their partners at:
Hanse Aerospace Hall 2a D280

AE Petsche Co. Hall 2b F52

Proponent Hall 3 A3. 

The Model will be available at www.devicetech.com shortly after the Paris Air Show. For more information, contact customer service at customerservice@devicetech.com.


###
About Device Technologies, Inc.
Founded in 1984, Device Technologies, Inc. (DTi) and DTi device technologies GmbH (DTi GmbH) designs, manufactures, and sells specialty components including grommet edgings, enclosure seals, trims, and wire protection sleeving and EMI shielding/absorber/thermal materials for a broad spectrum of uses including aerospace and avionics OEM and MRO applications, Tactical Equipment, Wind Turbines, Telecom back up power systems, and IT Servers. DTi’s advanced protection materials have wide applications in other industries such as HVAC, Transportation, Medical, Military, Gaming, Automotive and Food Service Manufacturing. 

DTi’s Advanced Technology Division (ATD) specializes in fully automated, linear and selective polymer coating for cable, wire, flat wire, stampings and profile metal-formed products encapsulated in a broad range of thermo-plastic and thermo-setting resins.

DTi continues to invest in R&D to enhance opportunities for its product and process technologies, in compliance with ISO 9001 and AS9100 standards. More information is available at www.devicetech.com  or call (508)-229-2000. 

Spring Fast®, Fast-Drop®, Trim-Fast™, Seal-Fast™, Protect-Fast™ and Shield-Fast™ are registered trademarks of Device Technologies, Inc. 

Customer Service Contact: 
Device Technologies, Inc.
155 Northboro Rd., Unit 8
Southborough, MA 01772-1033 
+1-508-229-2000, Ext. 210
customerservice@devicetech.com 

North America & Asia Technical Contact:
Steven O’Loughlin
Device Technologies, Inc.
+1-508-229-2000, Ext. 250
soloughlin@devicetech.com  

EMEA:
Meike Kurzak
DTi device technologies GmbH
Office: +49 40 350 85 128
Mobile: +49 177 170 3181
m.kurzak@devicetech.com