Wire protection grommet edging has to meet a simple need: prevent a metal edge from damaging cable insulation.  OEMs constantly wrestle with balancing cost and efficiency while achieving the protection needed.

Specifying the right grommet edging requires a broader assessment. Engineers must consider operating conditions, retention, installation methods, and the cost of implementing protection.

The traditional nylon caterpillar grommet (MS21266) needs adhesive for retention, whereas Spring-Fast® edging uses a steel substrate and finger pressure.

Nylon grommet edging                         

 

Both do the same job, and DTi sells both, but they are very different products with very different performance characteristics.

There are times when nylon can be the best choice for straightforward applications. Spring-Fast becomes the stronger choice when operating factors like vibration, temperature changes, production efficiency, cost savings, and long-term retention carry greater weight.

Where nylon makes engineering sense

Nylon grommet edging offers an economical way to protect wiring from exposed edges. The low purchase price makes it attractive for simple equipment, occasional builds, and applications where exposure to temperature fluctuations, vibration, or fluids is limited.

So, if nylon meets the design requirements and performs reliably, retaining that specification -which often includes an adhesive for edge retention – which will likely avoid any internal qualification work.

Consider a stationary indoor enclosure with stable temperatures, little vibration and readily accessible wiring. If the selected nylon edging and its adhesive meet the needs of the OEM, a more robust solution may deliver limited additional value. Low production volumes can further reduce the financial impact of installation time…which is an issue with nylon as it requires a gluing procedure which also involves fixturing and curing.

The important distinction is suitability. Select nylon because its properties and installed performance match the application. Its lower component price is useful, but that price alone does not establish the lowest installed cost.

What Changes the Decision Criteria? Vibration!

Several things: vibration, variable temperatures, budget and labor availability and ease of application/access.

For example, in vibrating equipment, edge protection must remain securely positioned while cables and surrounding structures experience repeated movement. If edging shifts, it exposes the metal edge and compromises the protection.

For adhesive-retained nylon, performance depends on both the edging and the bonded installation. Surface condition, adhesive selection, application technique and cure requirements therefore become engineering and manufacturing considerations. A properly specified adhesive system delivers performance but adds process variables that must be managed.

Spring-Fast uses a spring metal substrate to grip the edge mechanically. Installation requires finger pressure rather than adhesive bonding. For applications with significant vibration, Spring-Fast builds retention into the component rather than relying on a separate gluing operation.

What Changes the Decision Criteria? Temperature changes.

Thermal cycling adds another selection challenge. Repeated cycles of heat and cold cause materials to expand and contract, potentially stressing the interface between edging, adhesive, and panel. Engineers should assess the complete installed system across the expected temperature range.

Spring-Fast maintains its edge retention with its encapsulated metal substrate within its operating temperature range. This makes it a strong candidate where temperature shifts accompany vibration or where adhesive dependence -and its potential breakdown- is undesirable.

Selection still requires checking the specific series against panel thickness, edge geometry, temperature limits, chemical exposure and applicable requirements.

What Changes the Decision Criteria? The installed cost

The economic comparison changes when installation becomes part of the calculation. Adhesive-retained nylon may require preparation for bonding, adhesive application, temporary fixturing, curing and subsequent cleanup. Those steps consume costly labor resources even when the edging itself costs very little.

Spring-Fast removes the adhesive-related operations. DTi has found that OEMs see at least 49% savings in total installation cost compared with conventional glued nylon edging. The higher per-piece price of Spring-Fast can therefore be offset by a far simpler no-adhesive installation process.

What Changes the Decision Criteria? Productivity Gains

OEMs are constantly looking for ways to boost efficiency, which can also reduce costs. Spring-Fast, because it applies without adhesive, creates a 9.5X productivity improvement for the grommet installation process.

Removing adhesive operations shortens the installation sequence significantly by reducing process steps and eradicates the limbo of curing.

For repeated OEM installations, this small component decision can further affect down stream scheduling, work in progress, and available assembly capacity.

Performance History

The nylon grommet while good at what it does based on the application unfortunately requires frequent rework as the bonding does not attach the grommet to the edge uniformly.  Part of the problem is that gluing is not a standard operation- or at least it is very hard to standardize.  There tends to be variability between techs as to how and how much glue is applied.

Spring-Fast is a different animal, as there have been no failures in more than 35 years. That record deserves consideration where dependable wire protection matters, particularly in locations where future inspections and/or replacement would be difficult.

DTi’s range gives you the choice

Offering both products gives engineers a useful choice.

Nylon can satisfy straightforward requirements where its installed performance and economics are appropriate.

Spring-Fast is the preferred option when retention under vibration and temperature changes, reduced installation cost & faster processing are priorities.

The specification chosen should follow the application. Engineers should assess the environment, validate the fit, and compare the two installation processes. That approach preserves nylon’s legitimate role while making Spring-Fast’s performance and manufacturing advantages clear.

Find out more about Spring-Fast Grommet Edging  Free samples can be requested here

Read about all Grommet edging choices