Cutting-Edge Manufacturing Savings Model – for Grommets
Device Technologies (DTi), a leading manufacturer of wire protection products, will showcase its Manufacturing Savings Model at the Paris Air Show at the Paris-Le Bourget Exhibition Centre from 19-25 June 2023.
The Savings Model was created to demonstrate the lower installed costs and increased productivity that could be achieved using DTi’s Spring-Fast® Grommet Edging instead of the old glued-in grommets. The fast. finger-pressure-only, no-glue installations save time, and money and contribute to increased efficiency/productivity. Spring-Fast is FAA Approved and EWIS-compliant wire protection.
The model is simple. It allows manufacturers to enter 2 key data points; Aircraft Produced per Year, and Penetrations per Aircraft. The model automatically costs and compares the nylon grommet with Spring-Fast. We use a conservative OEM WRAP/Labor Rate of $130.
Nick Petri, Managing Director of DTi indicated, “This matrix illustrates why Spring-Fast is the best choice for wire protection needs, providing best-in-class performance with 49% install cost savings and 9.5x productivity gains. Technicians and management alike appreciate the simple fast finger pressure installation”.
DTi will be at the Paris Air Show demonstrating the model and sharing critical business case histories in aircraft fuselage, seating, avionics, in-flight entertainment, and electrical systems manufacturing applications. Visit them along with their partners at Hanse Aerospace Hall 2A Stand C286 / J
Founded in 1984, Device Technologies, Inc. (DTi) and DTi device technologies GmbH (DTi GmbH) design, and manufacture specialty components: grommet edgings, enclosure seals, trims, and wire protection sleeving for a broad array of applications ranging from aerospace and avionics OEMs, MRO, Military (tactical equipment), Energy (wind /power systems) and, Telecom/IT Servers to HVAC, Transportation, Medical, Military, Gaming, Automotive, and Food Service Manufacturing.
DTi’s Advanced Technology Division (ATD) specializes in fully automated, linear, & selective polymer coatings for cable, wire, flat wire, stampings, and profile metal-formed products.
DTi continually invests in R&D to enhance its product and process technologies so that OEM clients can benefit from highly effective and efficient components that meet ISO 9001 and AS9100 standards. See more at www.devicetech.com or call (508)-229-2000.
Spring-Fast®, Fast-Drop®, Trim-Fast™, Seal-Fast™, & Protect-Fast™ are registered trademarks of DTi.
Customer Service Contact:
Device Technologies, Inc.
155 Northboro Rd., Unit 8
Southborough, MA 01772-1033
+1-508-229-2000, Ext. 210
North America & Asia Technical Contact:
Device Technologies, Inc.
+1-508-229-2000, Ext. 250
DTi device technologies GmbH
Office: +49 40 350 85 128
Mobile: +1 508 328 6525