The Smarter Grommet Edging for Refit, Refurb, & Replace

The Smarter Grommet Edging for  Refit, Refurb, & Replace

TL:DR

Spring-Fast® M22529/2 offers significant cost and time savings vs the old glued-in nylon grommet MS21266

Management Benefits

1. Best in class performance: no known failure in 30+ years. It is designed to grip & is load tested to 20 G's on 3 axes
2. Efficiency 9.5x – Installs in seconds even with harnesses in place. No messy glue, prep, VOCs, fixturing, curing
3. Time is money: easier no glue installation creates savings of at least 49%
4. M22529/2 can be removed/reinstalled with no loss in retentive strength
5. Less consumable cost: less glue, cheesecloth, MEK/Acetone, disposable gloves
6. Less waste: M22529/2 is cut to length vs legacy 12.75” MS21266 nylon grommets
7. Less risk: significantly lower FO/FOD footprint – less taken on, less to leave behind.
8. Minimal process impact: as a PMA’d, Mil-STD & FAA Acceptable Standard Part -no STC is needed – just a log book entry for minor repairs & alterations
9. Safer worker environment with no VOCs, no MEK-based adhesives

Installer/Tech Benefits

1. Fast easy application: installs in seconds with finger pressure: no messy glue, cheesecloth, MEK/Acetone, gloves, fixturing or cure time needed
2. Easiest grommet to install in tight spaces or where harnesses are already in place
3. Safer work environment: no VOCs, no MEK-based adhesives or solvents
4. M22529/2 can be removed/reinstalled with no loss in retentive strength
5. Less risk: significantly lower FO/FOD footprint -less taken on, less to leave behind
6. Easy shop floor admin: with a PMA on an FAA Standard Part -just need a simple log book entry for minor repairs/alterations.

Learn more about Spring-Fast Mil-Spec Grommet edging here

Order free samples here