Southborough, USA – July 17th, 2025. Device Technologies (DTi) has launched a Spring-Fast® grommet variant, which offers multi-axis wire protection for flanged edges. Flanged or roll-formed edges on metal enclosures in product construction are common in many...
Spring-Fast M22529 - Significant Advantages over Glued-in Nylon Grommets 4 min read Grommet edging protects aerospace wiring, also known as the EWIS, from chafing. Since the 1950s, to provide this protection, most companies have used nylon or Teflon grommets (MS21266...
Powered equipment uses wiring to provide crucial data, power, and control. Inside the equipment, the wiring passes over sharp edges, which, without protection, can cause abrasion, creating data loss, system failure, or even fire. Obviously, fire is dangerous, but it...
Device Technologies Inc. (DTi) today announced that 4 new supply chain and sales support organizations are joining their sales and distribution network to further expand DTi’s growth domestically and internationally. DTi is a leading provider of wire and equipment...
DTi Recommends Switching to FAA Approved Spring-Fast(R) Grommet Edging
The F-35 has a long and illustrious career. Back in 2019 the Joint Program Office and Lockheed Martin wrapped up a $34 billion agreement for the production and delivery of 478 F-35As at the lowest price in the program’s history $77.9 million. A 12.8% price...
Device Technologies Inc (DTi) is attending AIX 2025 - Stand 6C80/D and will have a replica of a Junkers A50 tail section on display. It is a way of honoring the past while recognizing that nothing stands still ...and that from DTi's point of view, OEMs can take...
The three reasons are well-known to OEMs: Productivity, Cost, & Performance. First, understand what your techs must do to install a nylon grommet with an adhesive. Nylon MS21266 grommets need an adhesive to work because they have no inherent grip & will tend...
Congratulations to Gulfstream on reaching 1,000 wings – an impressive achievement after its 2022 expansion of the Savannah plant. It’s clearly paid off. DTi is proud to be included in Gulfstream products. Spring-Fast SL series wire protection grommet edging is...
Nylon grommets are failing because OEMs are looking for: 1) Cost savings 2) Efficiency gains 3) Best in class performance, Nylon grommets can’t deliver any of these benefits. However, Spring-Fast® grommet edging delivers on all three. 1. Cost Savings - at least 49%...
Aircraft engine maintenance, repair, and overhaul (MRO) is becoming a logistical problem for commercial aviation. A recent Aviation Week article here highlighted how MROs are facing a flood of increased demand which has significantly increased turnaround times (TAT)...
Eurosatory was an exciting show for Device Technologies Inc., (DTi). There was a wave of active interest in DTi’s class of product solutions: grommet edging, silicone/EPDM edge seals, and sleeving/wrap. OEMs saw for themselves how good we are at protecting vital...
Wire chafing is a common issue that can lead to severe problems such as data loss, functionality issues, and the risk of arcing and fires. This is where caterpillar grommets come into play, protecting wires and cables from chafing and arcing. In this guide, we'll...
Who doesn’t want to cut costs and improve efficiciency? Particularly in these times of supply chain stress, inventory holding costs rising, price increases, and the drive to do more with less as staff shortages bite. How would you like to cut a cost in half AND do...
The CH-47 Chinook is the go-anywhere, do-anything heavy lift helicopter that has been servicing air units worldwide for over 60 years. It can lift 28,000 of external load and in some configurations up to 54,000 lbs. A Chinook weighs about 27,000 lbs. so it can lift...
Executive Summary Spring-Fast® M22529/2 offers significant cost and time savings vs the old glued-in nylon grommet MS21266 Management Benefits Best in class performance: no known failure in 30+ years. It is designed to grip & is load tested to 20 G's on 3 axes...
Cutting-Edge Manufacturing Savings Model - for Grommets Device Technologies (DTi), a leading manufacturer of wire protection products, will showcase its Manufacturing Savings Model at the Paris Air Show at the Paris-Le Bourget Exhibition Centre from 19-25 June 2023....
Southborough, MA Feb 21, 2023 - Device Technologies, Inc. (DTi), designer and manufacturer of specialty wire protection, cable management and sealing solutions, has just applied for FAA Design Approval for a PMA -Parts Manufacturer Approval for Spring-Fast® Wire...
The US is teetering on the brink of a possible recession due in large part to Covid and the Ukraine war which have created both inflation and staff shortages. In this environment, many companies are struggling as material and labor costs rise significantly. Boeing...
The PMA - Parts Manufacturing Approval Part of Device Technologies Inc's (DTi) mission is to help MRO's improve their efficiency and their profitability. Part of that mission means seeking approvals where appropriate so our best-in-class protection products can meet...
Sorry for the pop-up, but our site visitors often forget to order free samples — so here’s your chance.
"*" indicates required fields
